Issue link: http://www.epageflip.net/i/1344445
95 SPRAYING SYSTEMS NOZZLES - PART NUMBER CHART SPRAY ANGLE PART NO. NOZZLE SIZES - ADD TO END OF PART NUMBER 0 SA 1/4 MEG 00 N/A 02 N/A 03 035 04 045 05 055 06 065 07 5 SA 1/4 MEG 05 N/A 02 N/A 03 N/A 04 N/A 05 055 06 N/A 07 15 SA 1/4 MEG 15 015 02 N/A 03 035 04 045 05 055 06 065 07 25 SA 1/4 MEG 25 015 02 N/A 03 035 04 045 05 055 06 065 07 40 SA 1/4 MEG 40 N/A 02 N/A 03 035 04 045 05 055 06 065 07 65 SA 1/4 MEG 65 N/A 02 025 03 N/A 04 045 05 055 06 065 07 0 SA 1/4 MEG 00 075 08 085 09 095 10 11 12 125 13 15 18 5 SA 1/4 MEG 05 N/A 08 N/A 09 N/A N/A N/A 12 N/A N/A 15 N/A 15 SA 1/4 MEG 15 075 08 085 09 095 10 11 12 125 13 15 18 25 SA 1/4 MEG 25 075 08 085 09 095 10 11 12 125 13 15 18 40 SA 1/4 MEG 40 075 08 085 09 095 10 11 12 125 13 15 18 65 SA 1/4 MEG 65 N/A 08 N/A 09 N/A 10 N/A 12 N/A N/A 15 N/A 0 SA 1/4 MEG 00 20 25 30 35 40 50 60 70 80 90 5 SA 1/4 MEG 05 20 25 30 N/A 40 N/A N/A N/A N/A N/A 15 SA 1/4 MEG 15 20 25 30 35 40 50 60 N/A N/A N/A 25 SA 1/4 MEG 25 20 25 30 35 40 50 60 N/A N/A N/A 40 SA 1/4 MEG 40 20 25 30 35 40 50 60 N/A N/A N/A 65 SA 1/4 MEG 65 20 N/A 30 N/A N/A N/A N/A N/A N/A N/A NOTE: N/A = This Nozzle Size Not Available WashJet® HIGH PRESSURE SPRAY NOZZLES W/O VANE FEATURES High Pressure, High Impact Solid Stream (0°) or Flat Fan Spray Pattern Spray Angles of 5° to 65° at Operating Pressures from 300 to 4000 PSI (20 to 275 bar) Quick Visual Reference for Spray Alignment with Milled Side Flats Longer Wear Life and Flow Control Accuracy with Especially Hardened Stainless Steel Construction WashJet® HP SPRAY NOZZLES W/ VANE PART # FEATURES LIST 1/4 MEG 15 01 Uniform Distribution by using Internal $12.34 1/4 MEG 15 02 Guide Vane to stabilize liquid turbulence $12.34 1/4 MEG 15 025 $12.34 1/4 MEG 25 02 $12.34 1/4 MEG 25 025 $12.34 1/4 MEG 25 03 $12.34 WT: .04 1/4" MEG NOZZLES PART NO. BREAKDOWN SA Standard w/o Vane 1/4 MEG 1/4" Male Pipe 4 Spray Angle 40° 0 0 3 Nozzle Size, 03.0 0 LIST: $12.34 WT: .03 SA 1/4 MEG 15 02 SA 1/4 MEG 15 04 SA 1/4 MEG 25 02 SA 1/4 MEG 25 03 1/4 MEG 15 025 1/4 MEG 25 02 RECOMMENDED FOR SURFACE CLEANER USE SPRAY NOZZLES