60
SPECIALTY ACCESSORIES
SUTTNER SLUDGE PUMP HOSE - HIGH OUTPUT
PART # LGTH FLOW RATE INLET ORIFICE WT LIST
999 001 540 15' 11:1 M22-M #4.0 x 0° 7.5 $259.26
NOTE: Attaches to any Pressure Washer & turns it into a High Output Pump. Great
for Flood Cleanup, Car Wash Pits, Draining Pools, or Chemical Spills. Vacuums up
Liquid Slurries at a Ratio of 11:1 (Example: 4 GPM will Produce 44 GPM Output)
HOSE BARB: 1-1/2" / PSI: 4000 / TEMP: 104° F
MUCK SCUPPER SLUDGE
& SLURRY EVACUATION TOOL
PART # LGTH INLET ORIFICE WT LIST
ANS04 15' 1/4" QCP #4.0 10.5 $160.29
ANS55 15' 1/4" QCP #5.5 10.5 $160.29
DHB17 1-1/2" Discharge Hose, PER FOOT $5.48
NOTE: Turn your pressure washer into a sludge, slurry, water evacuation tool.
Pressure energy of spray from pressure washer wand creates suction that pulls
water, up to 87gpm, through a 15' heavy wall 1½" discharge hose. Ideal for
clean out of sump pots, draining a fountain or pond, and !ood cleanup.
Watch it in action at: www.hydrotek.us/accessories.htm
999 001 540
ANS04
Connect to your existing ¼" pressure washer wand
quick connect coupler, no other tools required
UNDERCARRIAGE WAND
PART # PSI GPM LENGTH INLET OUTLET WT LIST
AVUN1 5000 6 52" 1/4"QCS 1/4"QCS 7.5 $132.81
For removing dirt and grime from underneath a vehicle, try Hydro Tek's undercarriage wand
with casters. Simply attach the wand to your power washer gun, insert QC nozzle and roll under
vehicle. The undercarriage wand is also ideal for cleaning under boat trailers and motor homes.
UNDERCARRIAGE WASHER
MODEL PSI GPM COVER COVER DIAM. WT LIST
ANTUN 5000 6 SS 24" 27 $1,299.23
Clean the undercarriage of trucks, boats, and farm equipment. Attach this accessory
to a hot or cold pressure washer to e"ortlessly remove grime from the underside of
vehicles and equipment. If you need to clean concrete, simply reverse the casters
and !ip the deck over to be used as an e&cient !at surface cleaner. Rust resistant,
stainless steel construction, with an aluminum spray bar, to ensure a long life of use
even in corrosive environments.
NOTE: 7" clearance height needed, 210°F Max.
D O N ' T S E E T H E E X AC T ACC E S S O R Y T H AT YO U N E E D, C A L L U S TO D AY.
